Topic: Help!! (Read 14200 times)

mgd · « **on:** July 31, 2013, 10:28:13 AM »

services.conf: ServicesRoot missing
services.conf: You must define the 'ServicesRoot' configuration directive
services.conf: in your services.conf file. This is a required setting that
services.conf: defines the main Administrative nick(s) Anope will obey.
services.conf: No ServicesRoot defined

*** Support resources: Read through the services.conf self-contained
*** documentation. Read the documentation files found in the 'docs'
*** folder. Visit our portal located at http://www.anope.org/. Join
*** our support channel on /server irc.anope.org channel #anope.

Press any key to continue . . .

whats would be the problem ? :s i did everything currectly in services.conf and unrealircd.conf :s

Jens Voss · « **Reply #1 on:** July 31, 2013, 10:33:08 AM »

Did you read what it said?

Open your Services.conf, search for "servicesroot", remove the # in front of this line.

mgd · « **Reply #2 on:** July 31, 2013, 10:44:21 AM »

i did it all errors removed now it only show Press any key to continue . . .
and nothing happen
and it still don't run in unrealircd :@

Jens Voss · « **Reply #3 on:** July 31, 2013, 10:49:29 AM »

Check your logfiles, search for any error Messages.

mgd · « **Reply #4 on:** July 31, 2013, 10:52:59 AM »

http://pastebin.com/5LFhiU0W i don't see any error :/

Jens Voss · « **Reply #5 on:** July 31, 2013, 10:56:53 AM »

This is not the right logfile ... Try another one. (Hint: there is a subdirectory called "logs")

mgd · « **Reply #6 on:** July 31, 2013, 11:00:59 AM »

k here u go http://pastebin.com/qCdfu3y3

Jens Voss · « **Reply #7 on:** July 31, 2013, 11:07:34 AM »

Connected to Server 1 (127.0.0.1:6667)
Read error from server: No such file or directory (error num: 2)

Your ircd is closing the Connection.

On your IRCd, do a /mode mgd +s *, try to start anope again, check for notices from your ircd. (you need to be an IRC Operator to get all messages)

mgd · « **Reply #8 on:** July 31, 2013, 11:10:14 AM »

oper Mr_King {
   class clients;
   from {
      userhost mgd@mgdazam.zapto.org;
   };
   password "******";
   flags
   {
      netadmin;
      can_zline;
      can_gzline;
      can_gkline;
      global;
   };
};

i did and still nothing happening :@

Dax Bane · « **Reply #9 on:** July 31, 2013, 11:43:25 AM »

mgd, from services.conf please provide RemoteServer and ServerName directives, and from unrealircd.conf can you provide your listen {} blocks and link {} block that is specific to services?

mgd · « **Reply #10 on:** July 31, 2013, 11:45:21 AM »

can u help me to do it ? come on skype mgd.azam2 please

Dax Bane · « **Reply #11 on:** July 31, 2013, 11:46:25 AM »

here would be good, so the next person who searches these forums with a similair problem will be able to see the answer just as well

mgd · « **Reply #12 on:** July 31, 2013, 11:47:37 AM »

can we do it on skype ?

Dax Bane · « **Reply #13 on:** July 31, 2013, 11:50:32 AM »

I said post here, not on skype - if you're worried about passwords then censor them

mgd · « **Reply #14 on:** July 31, 2013, 11:51:49 AM »

what u want me to post ? u didn't explain much -.

Dax Bane · « **Reply #15 on:** July 31, 2013, 11:53:42 AM »

*sigh*

RemoteServer and ServerName from services.conf (Anope's configuration file) in addition to all the listen {...} blocks and the link block specifically for anope (typically services.*) from unrealircd.conf (I don't have to tell you what that file configures, do I?)

mgd · « **Reply #16 on:** July 31, 2013, 11:54:57 AM »

ServerName "Mgd Network" [REQUIRED]
# Specifies the IRC server name which Services should use. May be
# overridden by the -name command-line option.

ServerName "services.mgdazam.zapto.org"

# ServerDesc <text> [REQUIRED]
# Specifies the text which should appear as the server's information in
# /whois and similar queries. May be overridden by the -desc
# command-line option.

ServerDesc "Services for IRC Networks"

# ServiceUser <usermask> [REQUIRED]
# Specifies the user@host mask which should be used by the Services
# pseudoclients. May be overridden by the -user and -host command-line
# options.

ServiceUser "services@mgdazam.zapto.org"

# ...Name <nick> <string> [REQUIRED except as noted below]
# Specify the nicknames (first parameter) and "real" names (second
# parameter) for the Services pseudoclients. BotServ and DevNull may
# be disabled by commenting out the appropriate lines below. Disabling
# BotServ is recommended on large netwo

Dax Bane · « **Reply #17 on:** July 31, 2013, 11:56:25 AM »

ok, and now the stuff I asked for from unrealircd.conf (and you didn't paste the RemoteServer directive from services.conf)

mgd · « **Reply #18 on:** July 31, 2013, 11:57:02 AM »

u didn't say what u want from unrealircd.conf -.-

Dax Bane · « **Reply #19 on:** July 31, 2013, 11:59:19 AM »

this will be the third time (and last, if you continue to stuff me around, I'll move on to the next user who at least has a clue and an IQ evalutation that reaches into double digits much less third!)...

the LISTEN blocks (all of them), and the LINK block (the one that explicitly mentions services.mgdazam.zapto.org)

mgd · « **Reply #20 on:** July 31, 2013, 12:03:32 PM »

http://pastebin.com/392EjR9g here you go i copied unrealircd.conf for u but i removed the passwords - Lol.

katsklaw · « **Reply #21 on:** July 31, 2013, 03:20:01 PM »

Quote from: mgd on July 31, 2013, 12:03:32 PM

http://pastebin.com/392EjR9g here you go i copied unrealircd.conf for u but i removed the passwords - Lol.

You still haven't replied with RemoteServer lines from services.conf and yes, Dax did ask for them 3 times.

Personal advice, it seems you dislike reading. You must change this behavior because 95% of an admins job is reading and comprehension. The other 5% is reacting to what he/she has read. This was evident in the first 3 lines of your help request.

"services.conf: ServicesRoot missing
services.conf: You must define the 'ServicesRoot' configuration directive
services.conf: in your services.conf file. This is a required setting that"

Yet you still asked even though you pasted the solution, proof positive that you didn't even read it. I would not say this if it were the only occurrence but alas you seem to be ignoring most of what people are telling you as well. You will find that people will quickly ignore you if you continue. You must understand that everyone here is a volunteer and truth be told, it's doubtful if anyone truly cares if you ever get your network running. They have their own lives to worry about and don't have time for fools. YOU are the one in need here. It would be in your best interest to take advantage of the generosity of those willing to help.

How do you plan to be a Net Admin if you can't yourself follow extremely basic instructions and requests?

My advice is to stop, give yourself a moment of pause, take a deep breath and actually read and comprehend what the errors/warnings and other people are telling you. This is not a race to see how fast you can fudge a network together.

I said all that in a genuine attempt to help you, if you get pissed off .. that's your choice but don't expect a pity party in return.

Hope that helps.

mgd · « **Reply #22 on:** July 31, 2013, 03:49:06 PM »

i got no more errors but still anope won't start -.-

katsklaw · « **Reply #23 on:** July 31, 2013, 04:32:11 PM »

Quote from: mgd on July 31, 2013, 03:49:06 PM

i got no more errors but still anope won't start -.-

Then something is still wrong. Let us know when you are willing to continue this.

Good Day.

News:

Author Topic: Help!! (Read 14200 times)