Topic: Problem With Anope and Unreal3.2 (Read 6128 times)

Chelsea · « **on:** July 07, 2007, 06:22:53 AM »

[Jul 07 01:21:37 2007] Every UserKey must be different. It's for YOUR safety! Remember that!
[Jul 07 01:21:37 2007] Loading IRCD Protocol Module: [unreal32]
[Jul 07 01:21:37 2007] status:

[Module, Okay - No Error]

[enc_none]
[Jul 07 01:21:37 2007] status:

[Module, Okay - No Error]

n00bie · « **Reply #1 on:** July 07, 2007, 08:38:59 AM »

http://forum.anope.org/misc.php?action=search&page=1&srchtxt=No%20such%20file%20or%20directory&filter_distinct=yes

Chelsea · « **Reply #2 on:** July 07, 2007, 09:26:33 AM »

didnt help me none now i just get client only port error

Chelsea · « **Reply #3 on:** July 07, 2007, 10:49:52 AM »

K No[w i get a new error and i'm lost can i get some guidance ?

heres the log

[Jul 07 05:47:59 2007] Every UserKey must be different. It's for YOUR safety! Remember that!
[Jul 07 05:47:59 2007] Loading IRCD Protocol Module: [unreal32]
[Jul 07 05:47:59 2007] status:

[Module, Okay - No Error]

[enc_none]
[Jul 07 05:47:59 2007] status:

[Module, Okay - No Error]

[cs_appendtopic]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\cs_appendtopic.dll.a05224
[Jul 07 05:48:00 2007] Module cs_appendtopic compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for APPENDTOPIC
[Jul 07 05:48:00 2007] 1: 0x0067B498
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 0
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 12
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 9
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 5
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 8
[Jul 07 05:48:00 2007] [cs_appendtopic] Loaded successfully
[Jul 07 05:48:00 2007] status:

[Module, Okay - No Error]

[cs_enforce]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\cs_enforce.dll.a05224
[Jul 07 05:48:00 2007] Module cs_enforce compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for ENFORCE
[Jul 07 05:48:00 2007] 1: 0x00678C40
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 0
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 12
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 9
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 5
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 8
[Jul 07 05:48:00 2007] status:

[Module, Okay - No Error]

[ns_maxemail]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\ns_maxemail.dll.a05224
[Jul 07 05:48:00 2007] Module ns_maxemail compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for REGISTER
[Jul 07 05:48:00 2007] 1: 0x006C07C8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for SET
[Jul 07 05:48:00 2007] 1: 0x006BC770
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying message list for reload
[Jul 07 05:48:00 2007] 1: 0x004C4BA8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: [ns_maxemail] NSEmailMax set to 0
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 0
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 12
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 9
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 5
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 8
[Jul 07 05:48:00 2007] status:

[Module, Okay - No Error]

[os_info]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\os_info.dll.a05224
[Jul 07 05:48:00 2007] Module os_info compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] os_info: Loading configuration directives...
[Jul 07 05:48:00 2007] os_info: OSInfoDBName is not defined in Services configuration file, using default os_info.db
[Jul 07 05:48:00 2007] os_info: Directive OSInfoDBName loaded (os_info.db)...
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1: 0x006E5680
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1: 0x006E5740
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1: 0x006E5800
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1: 0x006E58C0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying message list for db_saving
[Jul 07 05:48:00 2007] 1: 0x006E6D88
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying message list for db_backup
[Jul 07 05:48:00 2007] 1: 0x006E59D8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: existing msg: (0x004C4BA8), new msg (0x006E5A50)
[Jul 07 05:48:00 2007] Displaying message list for reload
[Jul 07 05:48:00 2007] 1: 0x006E5A50
[Jul 07 05:48:00 2007] 2: 0x004C4BA8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 0
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 4
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 12
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 9
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 5
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 8
[Jul 07 05:48:00 2007] status:

[Module, Okay - No Error]

[hs_request]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\hs_request.dll.a05224
[Jul 07 05:48:00 2007] Module hs_request compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for request
[Jul 07 05:48:00 2007] 1: 0x006E9408
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for activate
[Jul 07 05:48:00 2007] 1: 0x006E94D0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for reject
[Jul 07 05:48:00 2007] 1: 0x006E95A8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for waiting
[Jul 07 05:48:00 2007] 1: 0x006E9670
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for list
[Jul 07 05:48:00 2007] 1: 0x006E9738
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for drop
[Jul 07 05:48:00 2007] 1: 0x006E9800
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: existing msg: (0x006E6D88), new msg (0x006E98C8)
[Jul 07 05:48:00 2007] Displaying message list for db_saving
[Jul 07 05:48:00 2007] 1: 0x006E98C8
[Jul 07 05:48:00 2007] 2: 0x006E6D88
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: existing msg: (0x006E59D8), new msg (0x006E9918)
[Jul 07 05:48:00 2007] Displaying message list for db_backup
[Jul 07 05:48:00 2007] 1: 0x006E9918
[Jul 07 05:48:00 2007] 2: 0x006E59D8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: [hs_request] Set config vars: MemoUser=0 MemoOper=0 MemoSetters=0 DBName='hs_request.db'
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 0
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 12
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 5
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 8
[Jul 07 05:48:00 2007] [hs_request] Loading database...
[Jul 07 05:48:00 2007] [hs_request] Succesfully loaded database
[Jul 07 05:48:00 2007] hs_request loaded
[Jul 07 05:48:00 2007] status:

[Module, Okay - No Error]

[cs_appendtopic] Unloaded successfully
[Jul 07 05:48:00 2007] Displaying command list for APPENDTOPIC
[Jul 07 05:48:00 2007] 1: 0x0067B498
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for ENFORCE
[Jul 07 05:48:00 2007] 1: 0x00678C40
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] [hs_request] Saving database...
[Jul 07 05:48:00 2007] [hs_request] Succesfully saved database
[Jul 07 05:48:00 2007] hs_request un-loaded
[Jul 07 05:48:00 2007] Displaying command list for activate
[Jul 07 05:48:00 2007] 1: 0x006E94D0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for drop
[Jul 07 05:48:00 2007] 1: 0x006E9800
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for list
[Jul 07 05:48:00 2007] 1: 0x006E9738
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for request
[Jul 07 05:48:00 2007] 1: 0x006E9408
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for reject
[Jul 07 05:48:00 2007] 1: 0x006E95A8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for waiting
[Jul 07 05:48:00 2007] 1: 0x006E9670
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for REGISTER
[Jul 07 05:48:00 2007] 1: 0x006C07C8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for SET
[Jul 07 05:48:00 2007] 1: 0x006BC770
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1: 0x006E5740
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1: 0x006E58C0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1: 0x006E5680
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1: 0x006E5800
[Jul 07 05:48:00 2007] end

Jobe · « **Reply #4 on:** July 07, 2007, 11:08:10 AM »

[Jul 07 05:48:00 2007] Read error from server: No such file or directory (error num: 2)

Means, that somthing in either RemoteServer in services.conf or your IRCd's config is incorrect.

Can you run Anope in debug mode and then paste any "debug: received: " lines so we can see whats going on?

To run Anope in debug use "anope.exe -debug" on windows or "./services- debug" on *nix

Chelsea · « **Reply #5 on:** July 07, 2007, 11:46:12 AM »

Quote

Originally posted by Jobe1986
[Jul 07 05:48:00 2007] Read error from server: No such file or directory (error num: 2)

Means, that somthing in either RemoteServer in services.conf or your IRCd's config is incorrect.

Can you run Anope in debug mode and then paste any "debug: received: " lines so we can see whats going on?

To run Anope in debug use "anope.exe -debug" on windows or "./services- debug" on *nix

herse what it gave me i can post my ircd / anope configs if u want

[Jul 07 06:45:53 2007] Every UserKey must be different. It's for YOUR safety! Remember that!
[Jul 07 06:45:53 2007] Loading IRCD Protocol Module: [unreal32]
[Jul 07 06:45:53 2007] status:

[Module, Okay - No Error]

[enc_none]
[Jul 07 06:45:53 2007] status:

[Module, Okay - No Error]

[cs_appendtopic]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\cs_appendtopic.dll.a05572
[Jul 07 06:45:54 2007] Module cs_appendtopic compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for APPENDTOPIC
[Jul 07 06:45:54 2007] 1: 0x0067A470
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 0
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 12
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 9
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 5
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 8
[Jul 07 06:45:54 2007] [cs_appendtopic] Loaded successfully
[Jul 07 06:45:54 2007] status:

[Module, Okay - No Error]

[cs_enforce]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\cs_enforce.dll.a05572
[Jul 07 06:45:54 2007] Module cs_enforce compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for ENFORCE
[Jul 07 06:45:54 2007] 1: 0x00677C20
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 0
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 12
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 9
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 5
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 8
[Jul 07 06:45:54 2007] status:

[Module, Okay - No Error]

[ns_maxemail]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\ns_maxemail.dll.a05572
[Jul 07 06:45:54 2007] Module ns_maxemail compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for REGISTER
[Jul 07 06:45:54 2007] 1: 0x006BB738
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for SET
[Jul 07 06:45:54 2007] 1: 0x006A25D0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying message list for reload
[Jul 07 06:45:54 2007] 1: 0x005386B0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: [ns_maxemail] NSEmailMax set to 0
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 0
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 12
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 9
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 5
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 8
[Jul 07 06:45:54 2007] status:

[Module, Okay - No Error]

[os_info]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\os_info.dll.a05572
[Jul 07 06:45:54 2007] Module os_info compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] os_info: Loading configuration directives...
[Jul 07 06:45:54 2007] os_info: OSInfoDBName is not defined in Services configuration file, using default os_info.db
[Jul 07 06:45:54 2007] os_info: Directive OSInfoDBName loaded (os_info.db)...
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1: 0x006E4640
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1: 0x006E4700
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1: 0x006E47C0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1: 0x006E4880
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying message list for db_saving
[Jul 07 06:45:54 2007] 1: 0x006E5D40
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying message list for db_backup
[Jul 07 06:45:54 2007] 1: 0x006E4998
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: existing msg: (0x005386B0), new msg (0x006E4A10)
[Jul 07 06:45:54 2007] Displaying message list for reload
[Jul 07 06:45:54 2007] 1: 0x006E4A10
[Jul 07 06:45:54 2007] 2: 0x005386B0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 0
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 4
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 12
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 9
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 5
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 8
[Jul 07 06:45:54 2007] status:

[Module, Okay - No Error]

[hs_request]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\hs_request.dll.a05572
[Jul 07 06:45:54 2007] Module hs_request compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for request
[Jul 07 06:45:54 2007] 1: 0x006E83C8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for activate
[Jul 07 06:45:54 2007] 1: 0x006E8490
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for reject
[Jul 07 06:45:54 2007] 1: 0x006E8568
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for waiting
[Jul 07 06:45:54 2007] 1: 0x006E8630
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for list
[Jul 07 06:45:54 2007] 1: 0x006E86F8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for drop
[Jul 07 06:45:54 2007] 1: 0x006E87C0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: existing msg: (0x006E5D40), new msg (0x006E8888)
[Jul 07 06:45:54 2007] Displaying message list for db_saving
[Jul 07 06:45:54 2007] 1: 0x006E8888
[Jul 07 06:45:54 2007] 2: 0x006E5D40
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: existing msg: (0x006E4998), new msg (0x006E88D8)
[Jul 07 06:45:54 2007] Displaying message list for db_backup
[Jul 07 06:45:54 2007] 1: 0x006E88D8
[Jul 07 06:45:54 2007] 2: 0x006E4998
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: [hs_request] Set config vars: MemoUser=0 MemoOper=0 MemoSetters=0 DBName='hs_request.db'
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 0
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 12
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 5
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 8
[Jul 07 06:45:54 2007] [hs_request] Loading database...
[Jul 07 06:45:54 2007] [hs_request] Succesfully loaded database
[Jul 07 06:45:54 2007] hs_request loaded
[Jul 07 06:45:54 2007] status:

[Module, Okay - No Error]

[cs_appendtopic] Unloaded successfully
[Jul 07 06:45:54 2007] Displaying command list for APPENDTOPIC
[Jul 07 06:45:54 2007] 1: 0x0067A470
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for ENFORCE
[Jul 07 06:45:54 2007] 1: 0x00677C20
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] [hs_request] Saving database...
[Jul 07 06:45:54 2007] [hs_request] Succesfully saved database
[Jul 07 06:45:54 2007] hs_request un-loaded
[Jul 07 06:45:54 2007] Displaying command list for activate
[Jul 07 06:45:54 2007] 1: 0x006E8490
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for drop
[Jul 07 06:45:54 2007] 1: 0x006E87C0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for list
[Jul 07 06:45:54 2007] 1: 0x006E86F8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for request
[Jul 07 06:45:54 2007] 1: 0x006E83C8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for reject
[Jul 07 06:45:54 2007] 1: 0x006E8568
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for waiting
[Jul 07 06:45:54 2007] 1: 0x006E8630
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for REGISTER
[Jul 07 06:45:54 2007] 1: 0x006BB738
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for SET
[Jul 07 06:45:54 2007] 1: 0x006A25D0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1: 0x006E4700
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1: 0x006E4880
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1: 0x006E4640
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1: 0x006E47C0
[Jul 07 06:45:54 2007] end

katsklaw · « **Reply #6 on:** July 07, 2007, 02:21:35 PM »

Quote

Originally posted by Chelsea
didnt help me none now i just get client only port error

pehaps you could just stop for a second and think about what you wrote here ... CLIENT ONLY PORT and remember that Anope is a SERVER.[/

SNU · « **Reply #7 on:** July 08, 2007, 01:22:11 AM »

( offt:

id prefer that large logs have to be pasted onto a pastesite and only the link has to be provided here into he forum :/ Maybe the admins will spend a bit time of thinking about that

)

katsklaw · « **Reply #8 on:** July 20, 2007, 10:03:58 PM »

Quote

Originally posted by SNU
( offt:

id prefer that large logs have to be pasted onto a pastesite and only the link has to be provided here into he forum :/ Maybe the admins will spend a bit time of thinking about that )

Log files are ok to paste as pastebin urls can get lost, expire,deleted .. etc .. what we DONT want is users pasting their entire config files as 99% of the time we only need 1-3 lines, not the entire 1500+ lines from example.conf.

Reacter · « **Reply #9 on:** July 31, 2007, 06:59:09 AM »

sorry to bring up another UnrealIRCd error, I've tried some past suggestions given to others on this forum, none helped.
The error message from debug is:
[Jul 31 00:47:35 2007] Databases loaded
[Jul 31 00:47:35 2007] Info: Reflecting database records.
[Jul 31 00:47:35 2007] debug: Emitting event "db_saving" (1 args)
[Jul 31 00:47:35 2007] debug: Saving FFF databases
[Jul 31 00:47:37 2007] debug: Emitting event "db_saving" (1 args)
[Jul 31 00:47:37 2007] debug: Emitting event "connect" (1 args)
[Jul 31 00:47:41 2007] FATAL: Can't connect to server: No such file or directory
[Jul 31 00:47:58 2007] FATAL: Can't connect to server: No such file or directory
. If in regular mode, after an attempt by me to contact the server, it reflects on it's database, then cannot reconnect to the UnrealIRCd server. In the config files, The link is: remoteserver 217.0.0.1 6677 "pass" ServerName "services.localhost.net" . The ircd file's link is: link services.localhost.net
{
   username *;
   hostname 217.0.0.1;
   bind-ip *;
   port 6677;
   hub *;
   password-connect "pass";
   password-receive "pass";
   class servers;
};

Sorry for another Unreal error, and I hope this isn't to long.

[Edited on 31-7-2007 by Reacter]

ben · « **Reply #10 on:** July 31, 2007, 07:17:11 PM »

do you have a listen block for port 6677

Reacter · « **Reply #11 on:** July 31, 2007, 07:34:16 PM »

Listen block configured as: listen *:6677 .

SNU · « **Reply #12 on:** July 31, 2007, 08:16:08 PM »

Although you possibly have only ONE ip define the bind-ip and dont let it undefined by *
I had some troubles setting "bind-ip *"
Bind it to that IP you're using maybe 127.0.0.1 also works

katsklaw · « **Reply #13 on:** July 31, 2007, 11:44:25 PM »

Quote

Originally posted by SNU
Although you possibly have only ONE ip define the bind-ip and dont let it undefined by *
I had some troubles setting "bind-ip *"
Bind it to that IP you're using maybe 127.0.0.1 also works

Actually it's a safer bet to use the IP in the listen block: listen 1.2.3.4:6677;

using bind *; works very well.

Reacter · « **Reply #14 on:** August 01, 2007, 01:05:14 AM »

Thank you for the suggestions, neither binding worked. Has there been any cases of Windows Vista disrupting the link between UnrealIRCd and ANOPE?

katsklaw · « **Reply #15 on:** August 01, 2007, 01:28:35 AM »

The built in firewall might, but both Unreal and Anope run and link just fine on Vista.

Reacter · « **Reply #16 on:** August 01, 2007, 03:50:05 AM »

Thank you for helping me get ANOPE running. ANOPE was not trying to connect on the IP I specified, it tacked on it's own data to 217.0.0.1, and it wasn't until I was able to set up UnrealIRCd's oper command fully I realized what was happening. Thank you all for the help. ANOPE really is great

.

News:

Author Topic: Problem With Anope and Unreal3.2 (Read 6128 times)

Chelsea

Problem With Anope and Unreal3.2

n00bie

(No subject)

Chelsea

(No subject)

Chelsea

(No subject)

Jobe

(No subject)

Chelsea

(No subject)

katsklaw

(No subject)

SNU

(No subject)

katsklaw

(No subject)

Reacter

(No subject)

ben

(No subject)

Reacter

(No subject)

SNU

(No subject)

katsklaw

(No subject)

Reacter

(No subject)

katsklaw

(No subject)

Reacter

(No subject)