Anope IRC Services

Anope Support => 1.8.x/1.7.x Support (Read Only) => Topic started by: Chelsea on July 07, 2007, 06:22:53 AM

Title: Problem With Anope and Unreal3.2
Post by: Chelsea on July 07, 2007, 06:22:53 AM
[Jul 07 01:21:37 2007] Every UserKey must be different. It's for YOUR safety! Remember that!
[Jul 07 01:21:37 2007] Loading IRCD Protocol Module: [unreal32]
[Jul 07 01:21:37 2007] status: [enc_none]
[Jul 07 01:21:37 2007] status:
Title:
Post by: n00bie on July 07, 2007, 08:38:59 AM
http://forum.anope.org/misc.php?action=search&page=1&srchtxt=No%20such%20file%20or%20directory&filter_distinct=yes
Title:
Post by: Chelsea on July 07, 2007, 09:26:33 AM
didnt help me none now i just get client only port error
Title:
Post by: Chelsea on July 07, 2007, 10:49:52 AM
K No[w i get a new error and i'm lost can i get some guidance ?

heres the log

[Jul 07 05:47:59 2007] Every UserKey must be different. It's for YOUR safety! Remember that!
[Jul 07 05:47:59 2007] Loading IRCD Protocol Module: [unreal32]
[Jul 07 05:47:59 2007] status: [enc_none]
[Jul 07 05:47:59 2007] status: [cs_appendtopic]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\cs_appendtopic.dll.a05224
[Jul 07 05:48:00 2007] Module cs_appendtopic compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for APPENDTOPIC
[Jul 07 05:48:00 2007] 1:  0x0067B498
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 0
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 12
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 9
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 5
[Jul 07 05:48:00 2007] debug: cs_appendtopic Adding 3 texts for language 8
[Jul 07 05:48:00 2007] [cs_appendtopic] Loaded successfully
[Jul 07 05:48:00 2007] status: [cs_enforce]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\cs_enforce.dll.a05224
[Jul 07 05:48:00 2007] Module cs_enforce compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for ENFORCE
[Jul 07 05:48:00 2007] 1:  0x00678C40
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 0
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 12
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 9
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 5
[Jul 07 05:48:00 2007] debug: cs_enforce Adding 6 texts for language 8
[Jul 07 05:48:00 2007] status: [ns_maxemail]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\ns_maxemail.dll.a05224
[Jul 07 05:48:00 2007] Module ns_maxemail compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for REGISTER
[Jul 07 05:48:00 2007] 1:  0x006C07C8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for SET
[Jul 07 05:48:00 2007] 1:  0x006BC770
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying message list for reload
[Jul 07 05:48:00 2007] 1: 0x004C4BA8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: [ns_maxemail] NSEmailMax set to 0
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 0
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 12
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 9
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 5
[Jul 07 05:48:00 2007] debug: ns_maxemail Adding 2 texts for language 8
[Jul 07 05:48:00 2007] status: [os_info]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\os_info.dll.a05224
[Jul 07 05:48:00 2007] Module os_info compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] os_info: Loading configuration directives...
[Jul 07 05:48:00 2007] os_info: OSInfoDBName is not defined in Services configuration file, using default os_info.db
[Jul 07 05:48:00 2007] os_info: Directive OSInfoDBName loaded (os_info.db)...
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1:  0x006E5680
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1:  0x006E5740
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1:  0x006E5800
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1:  0x006E58C0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying message list for db_saving
[Jul 07 05:48:00 2007] 1: 0x006E6D88
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying message list for db_backup
[Jul 07 05:48:00 2007] 1: 0x006E59D8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: existing msg: (0x004C4BA8), new msg (0x006E5A50)
[Jul 07 05:48:00 2007] Displaying message list for reload
[Jul 07 05:48:00 2007] 1: 0x006E5A50
[Jul 07 05:48:00 2007] 2: 0x004C4BA8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 0
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 4
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 12
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 9
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 5
[Jul 07 05:48:00 2007] debug: os_info Adding 10 texts for language 8
[Jul 07 05:48:00 2007] status: [hs_request]
[Jul 07 05:48:00 2007] Runtime module location: .\modules\runtime\hs_request.dll.a05224
[Jul 07 05:48:00 2007] Module hs_request compiled against current or newer anope revision 1247, this is 1247
[Jul 07 05:48:00 2007] Displaying command list for request
[Jul 07 05:48:00 2007] 1:  0x006E9408
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for activate
[Jul 07 05:48:00 2007] 1:  0x006E94D0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for reject
[Jul 07 05:48:00 2007] 1:  0x006E95A8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for waiting
[Jul 07 05:48:00 2007] 1:  0x006E9670
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for list
[Jul 07 05:48:00 2007] 1:  0x006E9738
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for drop
[Jul 07 05:48:00 2007] 1:  0x006E9800
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: existing msg: (0x006E6D88), new msg (0x006E98C8)
[Jul 07 05:48:00 2007] Displaying message list for db_saving
[Jul 07 05:48:00 2007] 1: 0x006E98C8
[Jul 07 05:48:00 2007] 2: 0x006E6D88
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: existing msg: (0x006E59D8), new msg (0x006E9918)
[Jul 07 05:48:00 2007] Displaying message list for db_backup
[Jul 07 05:48:00 2007] 1: 0x006E9918
[Jul 07 05:48:00 2007] 2: 0x006E59D8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] debug: [hs_request] Set config vars: MemoUser=0 MemoOper=0 MemoSetters=0 DBName='hs_request.db'
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 0
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 12
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 5
[Jul 07 05:48:00 2007] debug: hs_request Adding 21 texts for language 8
[Jul 07 05:48:00 2007] [hs_request] Loading database...
[Jul 07 05:48:00 2007] [hs_request] Succesfully loaded database
[Jul 07 05:48:00 2007] hs_request loaded
[Jul 07 05:48:00 2007] status: [cs_appendtopic] Unloaded successfully
[Jul 07 05:48:00 2007] Displaying command list for APPENDTOPIC
[Jul 07 05:48:00 2007] 1:  0x0067B498
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for ENFORCE
[Jul 07 05:48:00 2007] 1:  0x00678C40
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] [hs_request] Saving database...
[Jul 07 05:48:00 2007] [hs_request] Succesfully saved database
[Jul 07 05:48:00 2007] hs_request un-loaded
[Jul 07 05:48:00 2007] Displaying command list for activate
[Jul 07 05:48:00 2007] 1:  0x006E94D0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for drop
[Jul 07 05:48:00 2007] 1:  0x006E9800
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for list
[Jul 07 05:48:00 2007] 1:  0x006E9738
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for request
[Jul 07 05:48:00 2007] 1:  0x006E9408
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for reject
[Jul 07 05:48:00 2007] 1:  0x006E95A8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for waiting
[Jul 07 05:48:00 2007] 1:  0x006E9670
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for REGISTER
[Jul 07 05:48:00 2007] 1:  0x006C07C8
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for SET
[Jul 07 05:48:00 2007] 1:  0x006BC770
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1:  0x006E5740
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for Info
[Jul 07 05:48:00 2007] 1:  0x006E58C0
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1:  0x006E5680
[Jul 07 05:48:00 2007] end
[Jul 07 05:48:00 2007] Displaying command list for oInfo
[Jul 07 05:48:00 2007] 1:  0x006E5800
[Jul 07 05:48:00 2007] end
Title:
Post by: Jobe on July 07, 2007, 11:08:10 AM
[Jul 07 05:48:00 2007] Read error from server: No such file or directory (error num: 2)

Means, that somthing in either RemoteServer in services.conf or your IRCd's config is incorrect.

Can you run Anope in debug mode and then paste any "debug: received: " lines so we can see whats going on?

To run Anope in debug use "anope.exe -debug" on windows or "./services- debug" on *nix
Title:
Post by: Chelsea on July 07, 2007, 11:46:12 AM
Quote
Originally posted by Jobe1986
[Jul 07 05:48:00 2007] Read error from server: No such file or directory (error num: 2)

Means, that somthing in either RemoteServer in services.conf or your IRCd's config is incorrect.

Can you run Anope in debug mode and then paste any "debug: received: " lines so we can see whats going on?

To run Anope in debug use "anope.exe -debug" on windows or "./services- debug" on *nix





herse what it gave me i can post my ircd / anope configs if u want


[Jul 07 06:45:53 2007] Every UserKey must be different. It's for YOUR safety! Remember that!
[Jul 07 06:45:53 2007] Loading IRCD Protocol Module: [unreal32]
[Jul 07 06:45:53 2007] status: [enc_none]
[Jul 07 06:45:53 2007] status: [cs_appendtopic]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\cs_appendtopic.dll.a05572
[Jul 07 06:45:54 2007] Module cs_appendtopic compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for APPENDTOPIC
[Jul 07 06:45:54 2007] 1:  0x0067A470
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 0
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 12
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 9
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 5
[Jul 07 06:45:54 2007] debug: cs_appendtopic Adding 3 texts for language 8
[Jul 07 06:45:54 2007] [cs_appendtopic] Loaded successfully
[Jul 07 06:45:54 2007] status: [cs_enforce]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\cs_enforce.dll.a05572
[Jul 07 06:45:54 2007] Module cs_enforce compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for ENFORCE
[Jul 07 06:45:54 2007] 1:  0x00677C20
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 0
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 12
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 9
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 5
[Jul 07 06:45:54 2007] debug: cs_enforce Adding 6 texts for language 8
[Jul 07 06:45:54 2007] status: [ns_maxemail]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\ns_maxemail.dll.a05572
[Jul 07 06:45:54 2007] Module ns_maxemail compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for REGISTER
[Jul 07 06:45:54 2007] 1:  0x006BB738
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for SET
[Jul 07 06:45:54 2007] 1:  0x006A25D0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying message list for reload
[Jul 07 06:45:54 2007] 1: 0x005386B0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: [ns_maxemail] NSEmailMax set to 0
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 0
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 12
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 9
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 5
[Jul 07 06:45:54 2007] debug: ns_maxemail Adding 2 texts for language 8
[Jul 07 06:45:54 2007] status: [os_info]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\os_info.dll.a05572
[Jul 07 06:45:54 2007] Module os_info compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] os_info: Loading configuration directives...
[Jul 07 06:45:54 2007] os_info: OSInfoDBName is not defined in Services configuration file, using default os_info.db
[Jul 07 06:45:54 2007] os_info: Directive OSInfoDBName loaded (os_info.db)...
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1:  0x006E4640
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1:  0x006E4700
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1:  0x006E47C0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1:  0x006E4880
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying message list for db_saving
[Jul 07 06:45:54 2007] 1: 0x006E5D40
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying message list for db_backup
[Jul 07 06:45:54 2007] 1: 0x006E4998
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: existing msg: (0x005386B0), new msg (0x006E4A10)
[Jul 07 06:45:54 2007] Displaying message list for reload
[Jul 07 06:45:54 2007] 1: 0x006E4A10
[Jul 07 06:45:54 2007] 2: 0x005386B0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 0
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 4
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 12
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 9
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 5
[Jul 07 06:45:54 2007] debug: os_info Adding 10 texts for language 8
[Jul 07 06:45:54 2007] status: [hs_request]
[Jul 07 06:45:54 2007] Runtime module location: .\modules\runtime\hs_request.dll.a05572
[Jul 07 06:45:54 2007] Module hs_request compiled against current or newer anope revision 1247, this is 1247
[Jul 07 06:45:54 2007] Displaying command list for request
[Jul 07 06:45:54 2007] 1:  0x006E83C8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for activate
[Jul 07 06:45:54 2007] 1:  0x006E8490
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for reject
[Jul 07 06:45:54 2007] 1:  0x006E8568
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for waiting
[Jul 07 06:45:54 2007] 1:  0x006E8630
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for list
[Jul 07 06:45:54 2007] 1:  0x006E86F8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for drop
[Jul 07 06:45:54 2007] 1:  0x006E87C0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: existing msg: (0x006E5D40), new msg (0x006E8888)
[Jul 07 06:45:54 2007] Displaying message list for db_saving
[Jul 07 06:45:54 2007] 1: 0x006E8888
[Jul 07 06:45:54 2007] 2: 0x006E5D40
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: existing msg: (0x006E4998), new msg (0x006E88D8)
[Jul 07 06:45:54 2007] Displaying message list for db_backup
[Jul 07 06:45:54 2007] 1: 0x006E88D8
[Jul 07 06:45:54 2007] 2: 0x006E4998
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] debug: [hs_request] Set config vars: MemoUser=0 MemoOper=0 MemoSetters=0 DBName='hs_request.db'
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 0
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 12
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 5
[Jul 07 06:45:54 2007] debug: hs_request Adding 21 texts for language 8
[Jul 07 06:45:54 2007] [hs_request] Loading database...
[Jul 07 06:45:54 2007] [hs_request] Succesfully loaded database
[Jul 07 06:45:54 2007] hs_request loaded
[Jul 07 06:45:54 2007] status: [cs_appendtopic] Unloaded successfully
[Jul 07 06:45:54 2007] Displaying command list for APPENDTOPIC
[Jul 07 06:45:54 2007] 1:  0x0067A470
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for ENFORCE
[Jul 07 06:45:54 2007] 1:  0x00677C20
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] [hs_request] Saving database...
[Jul 07 06:45:54 2007] [hs_request] Succesfully saved database
[Jul 07 06:45:54 2007] hs_request un-loaded
[Jul 07 06:45:54 2007] Displaying command list for activate
[Jul 07 06:45:54 2007] 1:  0x006E8490
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for drop
[Jul 07 06:45:54 2007] 1:  0x006E87C0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for list
[Jul 07 06:45:54 2007] 1:  0x006E86F8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for request
[Jul 07 06:45:54 2007] 1:  0x006E83C8
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for reject
[Jul 07 06:45:54 2007] 1:  0x006E8568
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for waiting
[Jul 07 06:45:54 2007] 1:  0x006E8630
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for REGISTER
[Jul 07 06:45:54 2007] 1:  0x006BB738
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for SET
[Jul 07 06:45:54 2007] 1:  0x006A25D0
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1:  0x006E4700
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for Info
[Jul 07 06:45:54 2007] 1:  0x006E4880
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1:  0x006E4640
[Jul 07 06:45:54 2007] end
[Jul 07 06:45:54 2007] Displaying command list for oInfo
[Jul 07 06:45:54 2007] 1:  0x006E47C0
[Jul 07 06:45:54 2007] end
Title:
Post by: katsklaw on July 07, 2007, 02:21:35 PM
Quote
Originally posted by Chelsea
didnt help me none now i just get client only port error


pehaps you could just stop for a second and think about what you wrote here  ... CLIENT ONLY PORT and remember that Anope is a SERVER.[/
Title:
Post by: SNU on July 08, 2007, 01:22:11 AM
( offt:

id prefer that large logs have to be pasted onto a pastesite and only the link has to be provided here into he forum  :/  Maybe the admins will spend a bit time of thinking about that :D )
Title:
Post by: katsklaw on July 20, 2007, 10:03:58 PM
Quote
Originally posted by SNU
( offt:

id prefer that large logs have to be pasted onto a pastesite and only the link has to be provided here into he forum  :/  Maybe the admins will spend a bit time of thinking about that :D )


Log files are ok to paste as pastebin urls can get lost, expire,deleted .. etc .. what we DONT want is users pasting their entire config files as 99% of the time we only need 1-3 lines, not the entire 1500+ lines from example.conf.
Title:
Post by: Reacter on July 31, 2007, 06:59:09 AM
sorry to bring up another UnrealIRCd error, I've tried some past suggestions given to others on this forum, none helped.  
The error message from debug is:
[Jul 31 00:47:35 2007] Databases loaded
[Jul 31 00:47:35 2007] Info: Reflecting database records.
[Jul 31 00:47:35 2007] debug: Emitting event "db_saving" (1 args)
[Jul 31 00:47:35 2007] debug: Saving FFF databases
[Jul 31 00:47:37 2007] debug: Emitting event "db_saving" (1 args)
[Jul 31 00:47:37 2007] debug: Emitting event "connect" (1 args)
[Jul 31 00:47:41 2007] FATAL: Can't connect to server: No such file or directory
[Jul 31 00:47:58 2007] FATAL: Can't connect to server: No such file or directory
.  If in regular mode, after an attempt by me to contact the server, it reflects on it's database, then cannot reconnect to the   UnrealIRCd server.  In the config files, The link is: remoteserver 217.0.0.1 6677 "pass"  ServerName "services.localhost.net" .  The ircd file's link is:  link services.localhost.net
{
   username *;
   hostname 217.0.0.1;
   bind-ip *;
   port 6677;
   hub *;
   password-connect "pass";
   password-receive "pass";
   class servers;
};

Sorry for another Unreal error, and I hope this isn't to long.

[Edited on 31-7-2007 by Reacter]
Title:
Post by: ben on July 31, 2007, 07:17:11 PM
do you have a listen block for port 6677
Title:
Post by: Reacter on July 31, 2007, 07:34:16 PM
Listen block configured as: listen     *:6677 .
Title:
Post by: SNU on July 31, 2007, 08:16:08 PM
Although you possibly have only ONE ip define the bind-ip and dont let it undefined by *
I had some troubles setting "bind-ip *"
Bind it to that IP you're using maybe 127.0.0.1 also works
Title:
Post by: katsklaw on July 31, 2007, 11:44:25 PM
Quote
Originally posted by SNU
Although you possibly have only ONE ip define the bind-ip and dont let it undefined by *
I had some troubles setting "bind-ip *"
Bind it to that IP you're using maybe 127.0.0.1 also works


Actually it's a safer bet to use the IP in the listen block: listen 1.2.3.4:6677;

using bind *; works very well.
Title:
Post by: Reacter on August 01, 2007, 01:05:14 AM
Thank you for the suggestions, neither binding worked.  Has there been any cases of Windows Vista disrupting the link between UnrealIRCd and ANOPE?
Title:
Post by: katsklaw on August 01, 2007, 01:28:35 AM
The built in firewall might, but both Unreal and Anope run and link just fine on Vista.
Title:
Post by: Reacter on August 01, 2007, 03:50:05 AM
Thank you for helping me get ANOPE running.  ANOPE was not trying to connect on the IP I specified, it tacked on it's own data to 217.0.0.1, and it wasn't until I was able to set up UnrealIRCd's oper command fully I realized what was happening.  Thank you all for the help.  ANOPE really is great :) .