hi, i'm having problems linking anope and unrealircd, error is: Read error from server: No such file or directory (error num: 2), files below, can you please help?
log file;
[Nov 21 23:16:51 2009] Module hs_request compiled against current version of Anope 2558
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] TS6 not supported on this ircd
[Nov 21 23:16:51 2009] serv_uplink is (nil) and status is 0
[Nov 21 23:16:51 2009] Databases loaded
[Nov 21 23:16:51 2009] Info: Reflecting database records.
[Nov 21 23:16:51 2009] Connected to Server 1 (127.0.0.1:7070)
[Nov 21 23:16:52 2009] Read error from server: No such file or directory (error num: 2)
unrealircd.conf file;
link services.localhost.net
{
username *;
hostname 127.0.0.1;
bind-ip *;
port 7070;
hub *;
password-connect "password";
password-receive "password";
class servers;
options {
/* Note: You should not use autoconnect when linking services */
//autoconnect;
ssl;
zip;
};
};
services.conf file;
/*
* [REQUIRED] IRCd Config
*
* This section is used to set up Anope to connect to your IRC network.
* This section can be included multiple times, and Anope will attempt to
* connect to each server until it finally connects.
*/
uplink
{
/*
* The IP or hostname of the IRC server you wish to connect Services to.
* Usually, you will want to connect Services over 127.0.0.1 (aka localhost).
*
* NOTE: On some shell providers, this will not be an option.
*/
host = "127.0.0.1"
/*
* The port to connect to.
* The IRCd *MUST* be configured to listen on this port, and to accept
* server connections.
*
* Refer to your IRCd documentation for how this is to be done.
*/
port = 7070
/*
* The password to send to the IRC server for authentication.
* This must match the link block on your IRCd.
*
* Refer to your IRCd documentation for more information on link blocks.
*/
password = "password"
}
/*
* [REQUIRED] Server Information
*
* This section contains information about the Services server.
*/
serverinfo
{
/*
* The hostname that Services will be seen as, it must have no conflicts with any
* other server names on the rest of your IRC network. Note that it does not have
* to be an existing hostname, just one that isn't on your network already. This
* can be overridden with the -name command-line option when starting Services.
*/
name = "services.localhost.net"
/*
* The text which should appear as the server's information in /whois and similar
* queries. This can be overridden by the -desc command-line option when starting
* Services.
*/
description = "Services for IRC Networks"
/*
* The local address that Services will bind to before connecting to the remote
* server. This may be useful for multihomed hosts. If neither of these are given,
* Services will let the Operating System choose the local address. If only a
* hostname is specified, Services will bind to that address but let the Operating
* System choose the local port. These directives are optional, and may be overridden
* with the -local command-line option when starting Services.
*
* If you don't know what this means or don't need to use it, just leave these
* directives commented out.
*/
//#localhost = "nowhere."
//#localport = 0
/*
* This directive instructs Anope which IRCd Protocol to speak when connecting.
* You MUST modify this to match the IRCd you run.
*
* Supported:
* - inspircd11
* - inspircd12
* - ratbox
* - bahamut
* - unreal32
*/
type = "inspircd11"
/*
* What Server ID to use for this connection?
* Note: This should *ONLY* be used for TS6/P10 IRCds. Refer to your IRCd documentation
* to see if this is needed.
*/
#id = "00A"
/*
* These identify the ident@hostname which will be used by the Services pesudoclients.
* They can be overridden by the -user and -host command-line options when starting
* Services.
*/
ident = "services"
hostname = "localhost.net"
/*
* The filename containing the Services process ID. The path is relative to the
* services executable. If not given, defaults to "services.pid".
*/
pid = "services.pid"
/*
* The filename containing the Message of the Day. The path is relative to the
* services executable. If not given, defaults to "services.motd".
*/
motd = "services.motd"
}
/*