Anope Support > 1.6.x (Read Only)

Can't link with PTlink 6

(1/1)

rikatz:
Hello:

I'm trying to link Anope 1.6.4 with PTLink 6 and I'm getting the following error:

 *** Notice -- Services connected
* *** Notice -- Link with Services.LinuxAjuda.org[unknown@255.255.255.255] established: (TS) link
* *** Notice -- Link Services.LinuxAjuda.org[unknown@127.0.0.1] dropped, incompatible TS protocol version (3,6)
* *** Notice -- Services DOWN or network split
* *** Notice -- Services.LinuxAjuda.org was connected for 1 seconds.  0/1 sendK/recvK.
* *** Notice -- Server Services.LinuxAjuda.org split from irc.linuxajuda.org

And there is my ircd.conf:
H:*::Services.LinuxAjuda.org
U:Services.LinuxAjuda.org
C:127.0.0.1:pass:Services.LinuxAjuda.org:6667:51
N:127.0.0.1:pass:Services.LinuxAjuda.org::51

May someone help me?

Thanks :D

[Edited on 14-4-2006 by rikatz]

Trystan Scott Lee:
PTlink 6 what? open src/protocol/ptlink.h and read

/*
   The following variables are set to define the TS protocol version
   that we support.

   PTLink 6.14 to 6.17  TS CURRENT is 6  and MIN is 3
   PTlink 6.18          TS CURRENT is 9  and MIN is 3
   PTLink 6.19       TS CURRENT is 10 and MIN is 9

   If you are running 6.18 or 6.19 do not touch these values as they will
   allow you to connect

   If you are running an older version of PTLink, first think about updating
   your ircd, or changing the TS_CURRENT to 6 to allow services to connect
*/

#define PTLINK_TS_CURRENT 9
#define PTLINK_TS_MIN 3

rikatz:
Sorry, i've forgot...

My PTLink version is 6.19.5

And there isn't this archive (source/src/protocol/ptlink.h)

Thanks

Trystan Scott Lee:
update to 1.7.x and forget the 1.6.x branch if you want real support for ptlink

Navigation

[0] Message Index

Go to full version