Anope IRC Services

Anope Support => 1.8.x/1.7.x Support (Read Only) => Topic started by: Vunderik on January 13, 2007, 06:01:17 AM

Title: -NickServ- unnkown command help
Post by: Vunderik on January 13, 2007, 06:01:17 AM

I see services connected to my UnrealIRCD in status, but all my attemps to send them any command fail with such error. I don't know what to do. The same problems with register and identify commands and with all services.
WinXP, anope-1.7.9, Unreald 3.2.6

Title:
Post by: n00bie on January 13, 2007, 06:10:00 AM

Firstly, services didn't need the autoconnect options on your services link block. And by looking at your config, i don't see anything wrong with it, except that on line no.1 on your unrealircd.conf you have

Fixedsys;Arial;Fixedsys;Arial;Fixedsys;Fixedsys;Arial;Fixedsys;Arial;Fixedsys;Arial;include "help.conf";
which can happen because of an improper editor or edit. that will give you an error on your unrealircd.cong when you do /rehash

line no. 4
include "aliases\anope.conf"

you have a missing semicolon at the end.


[Edited on 13-1-2007 by n00bie]

Title:
Post by: Jan Milants on January 13, 2007, 12:14:21 PM

Quote

Originally posted by Vunderik
anope-1.7.9

you should really consider upgrading...

Title:
Post by: Jobe on January 13, 2007, 12:23:33 PM

Quote

Originally posted by Viper
you should really consider upgrading...

Id personally say "consider" is an understatement and that "should" should have been emphasized. :P

Title:
Post by: Hassankhalid on January 13, 2007, 02:02:04 PM

well  anope link block in conf dont need  autoconnect 2nd you should  update anope version in unreal config check this part below

include "aliases/anope.conf";<<<<<<  that one hope your problem fix u need add this line in config.

Title:
Post by: heinz on January 13, 2007, 04:43:00 PM

Hassankhalid, you've just repeated whats been said already. Please check to make sure you're adding something useful to the topic, otherwise some may see it as spam or post-count-inflating.

Title:
Post by: katsklaw on January 13, 2007, 05:13:40 PM

Guys, If services is returning "-NickServ- unnkown command help" ,then services is already successfully connected so it's not a link issue.

Vunderik, upgrade to 1.7.18 and see if that fixes your problem.

Title:
Post by: Vunderik on January 14, 2007, 09:14:29 AM

I've updated and corrected mistake with semicolon, but Nickserv returns exactly the same mistake. Maybe something is wrong with services.conf? But when i start them they return no mistakes.

Title:
Post by: n00bie on January 14, 2007, 10:35:46 AM

i suggest you do a backup of your databases and upgrade your services to 1.7.18

Title:
Post by: Vunderik on January 14, 2007, 11:25:39 AM

;( the same problem with 1.7.18... I have no idea why

Title:
Post by: n00bie on January 14, 2007, 11:41:16 AM

do you have 'UseStrictPrivMsg' enabled on your services.conf