Topic: Anope 1.9.9 Language noexists? (Read 12509 times)

k9 · « **on:** November 23, 2013, 11:34:13 AM »

Hi, i have installed new anope, all is ok but ... i have only en ( English ) language on irc... i have modified conf, but where is the problem? i can see some .po in source/language but how to activate it?

i whould have fr_FR.utf-8 activate, i have all locales installed... help?

Quote

nickserv -> "help set language"
(12:24) Â«Â«Â« [ Notice ] NickServ Syntax: set language language
(12:24) Â«Â«Â« [ Notice ] NickServ
(12:24) Â«Â«Â« [ Notice ] NickServ Changes the language Services uses when sending messages to
(12:24) Â«Â«Â« [ Notice ] NickServ you (for example, when responding to a command you send).
(12:24) Â«Â«Â« [ Notice ] NickServ language should be chosen from the following list of
(12:24) Â«Â«Â« [ Notice ] NickServ supported languages:
(12:24) Â«Â«Â« [ Notice ] NickServ en (English)

Quote

languages = "fr_FR.UTF-8 ca_ES.UTF-8 de_DE.UTF-8 el_GR.UTF-8 es_ES.UTF-8 hu_HU.UTF-8 it_IT.UTF-8 nl_NL.UTF-8 pl_PL.UTF-8 pt_PT.UTF-8 ru_RU.UTF-8 tr_TR.UTF-8"

   /*
    * Default language that non- and newly-registered nicks will receive messages in.
    * Leave empty to default to English.
    */
   defaultlanguage = "fr_FR.UTF-8"

k9 · « **Reply #1 on:** November 24, 2013, 06:00:45 PM »

Quote

nickserv -> "set language fr_FR.UTF-8"
(18:41) Â«Â«Â« [ Notice ] NickServ Votre langue est maintenant le FranÃƒÂ§ais.
chanserv -> "help"
(18:41) Â«Â«Â« [ Notice ] ChanServ ChanServ allows you to register and control various
(18:41) Â«Â«Â« [ Notice ] ChanServ aspects of channels. ChanServ can often prevent
(18:41) Â«Â«Â« [ Notice ] ChanServ malicious users from "taking over" channels by limiting

... Why its so hard to change to fr....

k9 · « **Reply #2 on:** November 24, 2013, 06:06:23 PM »

Could help me please... nothing works

Adam · « **Reply #3 on:** November 24, 2013, 06:50:23 PM »

apt-get install gettext locales-all

And maybe gettext-dev (I can't remember the name of the development libraries for gettext)

k9 · « **Reply #4 on:** November 24, 2013, 07:26:20 PM »

re-install gettext, gettex libs, devel, config, make and make install anope, nothing changes...

Adam · « **Reply #5 on:** November 24, 2013, 07:27:50 PM »

Does /ns help set language only show english? Or does it show all languages?

k9 · « **Reply #6 on:** November 24, 2013, 07:32:22 PM »

Quote

nickserv -> "help"
(20:32) Â«Â«Â« [ Notice ] NickServ NickServ allows you to register a nickname and
(20:32) Â«Â«Â« [ Notice ] NickServ prevent others from using it. The following
(20:32) Â«Â«Â« [ Notice ] NickServ commands allow for registration and maintenance of
(20:32) Â«Â«Â« [ Notice ] NickServ nicknames; to use them, type /msg NickServ command.
(20:32) Â«Â«Â« [ Notice ] NickServ For more information on a specific command, type
(20:32) Â«Â«Â« [ Notice ] NickServ /msg NickServ HELP command.
(20:32) Â«Â«Â« [ Notice ] NickServ ACCESS Modify the list of authorized addresses
(20:32) Â«Â«Â« [ Notice ] NickServ AJOIN Manage your auto join list
(20:32) Â«Â«Â« [ Notice ] NickServ ALIST List channels you have access on
(20:32) Â«Â«Â« [ Notice ] NickServ CONFIRM Confirm a passcode
(20:32) Â«Â«Â« [ Notice ] NickServ DROP Cancel the registration of a nickname
(20:32) Â«Â«Â« [ Notice ] NickServ GLIST Lists all nicknames in your group
(20:32) Â«Â«Â« [ Notice ] NickServ GROUP Join a group
(20:32) Â«Â«Â« [ Notice ] NickServ HELP Displays this list and give information about commands
(20:32) Â«Â«Â« [ Notice ] NickServ IDENTIFY Identify yourself with your password
(20:32) Â«Â«Â« [ Notice ] NickServ INFO Displays information about a given nickname
(20:32) Â«Â«Â« [ Notice ] NickServ LOGOUT Reverses the effect of the IDENTIFY command
(20:32) Â«Â«Â« [ Notice ] NickServ RECOVER Regains control of your nick
(20:32) Â«Â«Â« [ Notice ] NickServ REGISTER Register a nickname
(20:32) Â«Â«Â« [ Notice ] NickServ RESETPASS Helps you reset lost passwords
(20:32) Â«Â«Â« [ Notice ] NickServ SET Set options, including kill protection
(20:32) Â«Â«Â« [ Notice ] NickServ STATUS Returns the owner status of the given nickname
(20:32) Â«Â«Â« [ Notice ] NickServ UNGROUP Remove a nick from a group
(20:32) Â«Â«Â« [ Notice ] NickServ UPDATE Updates your current status, i.e. it checks for new memos
(20:32) Â«Â«Â« [ Notice ] NickServ
(20:32) Â«Â«Â« [ Notice ] NickServ Services Operator commands
(20:32) Â«Â«Â« [ Notice ] NickServ GETEMAIL, LIST, SASET, SUSPEND, UNSUSPEND
(20:32) Â«Â«Â« [ Notice ] NickServ
(20:32) Â«Â«Â« [ Notice ] NickServ Use the HELP ALL command to list all commands and their descriptions.
(20:32) Â«Â«Â« [ Notice ] NickServ
(20:32) Â«Â«Â« [ Notice ] NickServ Services Operators can also drop any nickname without needing
(20:32) Â«Â«Â« [ Notice ] NickServ to identify for the nick, and may view the access list for
(20:32) Â«Â«Â« [ Notice ] NickServ any nickname.
(20:32) Â«Â«Â« [ Notice ] NickServ
(20:32) Â«Â«Â« [ Notice ] NickServ Accounts that are not used anymore are subject to
(20:32) Â«Â«Â« [ Notice ] NickServ the automatic expiration, i.e. they will be deleted
(20:32) Â«Â«Â« [ Notice ] NickServ after 21 days if not used.
(20:32) Â«Â«Â« [ Notice ] NickServ
(20:32) Â«Â«Â« [ Notice ] NickServ NOTICE: This service is intended to provide a way for
(20:32) Â«Â«Â« [ Notice ] NickServ IRC users to ensure their identity is not compromised.
(20:32) Â«Â«Â« [ Notice ] NickServ It is NOT intended to facilitate "stealing" of
(20:32) Â«Â«Â« [ Notice ] NickServ nicknames or other malicious actions. Abuse of NickServ
(20:32) Â«Â«Â« [ Notice ] NickServ will result in, at minimum, loss of the abused
(20:32) Â«Â«Â« [ Notice ] NickServ nickname(s).

Adam · « **Reply #7 on:** November 24, 2013, 07:33:57 PM »

Ok, that is /ns help, not /ns help set langauge.

Seeing as you did get the original translation message from english -> french I'd have to guess that the language strings are simply not translated. A lot has changed between 1.8 and 1.9 and most of the language strings no longer work.

k9 · « **Reply #8 on:** November 24, 2013, 07:35:41 PM »

Quote

nickserv -> "help set language"
(20:34) Â«Â«Â« [ Notice ] NickServ Syntax: set language language
(20:34) Â«Â«Â« [ Notice ] NickServ
(20:34) Â«Â«Â« [ Notice ] NickServ Changes the language Services uses when sending messages to
(20:34) Â«Â«Â« [ Notice ] NickServ you (for example, when responding to a command you send).
(20:34) Â«Â«Â« [ Notice ] NickServ language should be chosen from the following list of
(20:34) Â«Â«Â« [ Notice ] NickServ supported languages:
(20:34) Â«Â«Â« [ Notice ] NickServ en (English)
(20:34) Â«Â«Â« [ Notice ] NickServ fr_FR.UTF-8 (FranÃƒÂ§ais)
(20:34) Â«Â«Â« [ Notice ] NickServ de_DE.UTF-8 (Deutsch)

but in source .po i can see about 90% is traduced from en to fr ...

Adam · « **Reply #9 on:** November 24, 2013, 07:38:22 PM »

As long as it isn't marked 'fuzzy' it should translate ok.

k9 · « **Reply #10 on:** November 25, 2013, 09:26:47 AM »

I understand this, so, it works on 1.9.8 and no on 1.9.9, but Deutch language works ... what's the problem whith fr language?

Adam · « **Reply #11 on:** November 25, 2013, 05:22:06 PM »

Noone has translated the fr language.

k9 · « **Reply #12 on:** November 25, 2013, 08:12:29 PM »

Ok so am going to try helping translate it.

Thx for all

Adam · « **Reply #13 on:** November 25, 2013, 08:13:50 PM »

Okay, read docs/LANGUAGES on instructions on how to do that.

k9 · « **Reply #14 on:** November 27, 2013, 07:19:55 PM »

Quote from: k9 on November 25, 2013, 08:12:29 PM

Ok so am going to try helping translate it.

Thx for all

40% ok from Alpha1

Quote

(20:19) Â«Â«Â« [ Notice ] NickServ Les Services Operators peuvent Ã©galement effacer n'importe quel
(20:19) Â«Â«Â« [ Notice ] NickServ pseudo sans avoir besoin de s'identifier pour le celui-ci, et
(20:19) Â«Â«Â« [ Notice ] NickServ peuvent voir l'access list pour n'importe quel pseudo
(20:19) Â«Â«Â« [ Notice ] NickServ (/msg XÂ ACCESS LIST nick).
(20:19) Â«Â«Â« [ Notice ] NickServ Les pseudos qui ne sont plus utilisÃ©s sont sujets Ã
(20:19) Â«Â«Â« [ Notice ] NickServ l'expiration automatique, c'est-Ã -dire qu'ils seront effacÃ©s
(20:19) Â«Â«Â« [ Notice ] NickServ aprÃ¨s 21 jours de non utilisation.
(20:19) Â«Â«Â« [ Notice ] NickServ REMARQUE: Ce service est conÃ§u pour fournir un moyen aux
(20:19) Â«Â«Â« [ Notice ] NickServ utilisateurs IRC d'assurer que leur identitÃ© n'est pas
(20:19) Â«Â«Â« [ Notice ] NickServ usurpÃ©e. Il n'est PAS destinÃ© Ã faciliter le "vol" des
(20:19) Â«Â«Â« [ Notice ] NickServ pseudos ou autres choses de ce genre. L'abus de NickServ entraÃ®nera,
(20:19) Â«Â«Â« [ Notice ] NickServ au minimum, la perte du(des) pseudo(s) faisant l'objet de
(20:19) Â«Â«Â« [ Notice ] NickServ l'abus.

meepmeep · « **Reply #15 on:** November 30, 2013, 11:35:13 AM »

Hi K9,

I'm a french user, if you want, we can work together on the french .po file !

k9 · « **Reply #16 on:** November 30, 2013, 02:11:40 PM »

no problem

k9 · « **Reply #17 on:** November 30, 2013, 02:58:48 PM »

EveryOne who whants to help contribute to translate it, please MP me , i send you the link to acces to the file.

Thx a lot !

News:

Author Topic: Anope 1.9.9 Language noexists? (Read 12509 times)

k9

Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

Adam

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

Adam

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

Adam

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

Adam

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

Adam

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

Adam

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

meepmeep

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?

k9

Re: Anope 1.9.9 Language noexists?