Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Phillip]

Having problems with trying to connect the services and unrealircd...

After typing ./bin/services in the command line...

Code: [Select]

Anope 2.0.7, build #5, compiled 09:13:59 Nov 28 2019
Using configuration file conf/services.conf
Attempting to connect to uplink #1 IPHERE (IPHERE), port 5569
Successfully connected to uplink #1 IPHERE:5569
Lost connection from uplink #1 (IPHERE:5569): Connection reset by peer
How would I fix this to make it actually connect successful without errors?

[Phillip]

Now I am getting this error.

Code: [Select]

Anope 2.0.7, build #6, compiled 22:16:21 Nov 28 2019
Using configuration file conf/services.conf
Attempting to connect to uplink #1 IPHERE (IPHERE), port 6900
Successfully connected to uplink #1 IPHERE:6900
ERROR: Link 'services.domain.com' denied (Authentication failed) [@IPHERE.46324]
ERROR: Closing Link: [IPHERE] (Link denied (Authentication failed))


[Zemra]

You should read and check your errors, as explained on IRC, make sure your password type is the same on both sides.

[Phillip]

I have checked both and everything...
They are both correct.
Not sure what's going on with it, though.

[Zemra]

Without link blocks available to see, I cant help any further.

[Phillip]

Unrealircd

Code: [Select]

link scooby.paranoianet.com
{
        incoming {
                mask *192.99.249.221;
        };

        outgoing {
                bind-ip 192.99.249.221; /* or explicitly an IP */
                hostname scooby.paranoianet.com;
                port 6900;
        };

        /* We use the SPKI fingerprint of the other server for authentication.
         * Run './unrealircd spkifp' on the other side to get it.
         * NOTE: requires UnrealIRCd 4.0.16 or later.
         */
        password "2yhZqcqoBxA3rfIz5F4NfG4/+1rrilRpsbWnmsFnZ7g=" { spkifp; }

        class servers;
};

/* The link block for services is usually much simpler.
 * For more information about what Services are,
 * see https://www.unrealircd.org/docs/Services
 */
link services.paranoianet.com
{
        incoming {
                mask *192.99.249.221;
        };

        password "2yhZqcqoBxA3rfIz5F4NfG4/+1rrilRpsbWnmsFnZ7g=";

        class servers;
};

/* U-lines give other servers (even) more power/commands.
 * If you use services you must add them here.
 * NEVER put the name of an UnrealIRCd server here!!!
 */
ulines {
        services.paranoianet.com;
};



[CrazyCat]

The anope configuration (uplink) could help to.
And the * in the incoming mask is useless.

ERROR: Link 'services.domain.com' denied (Authentication failed) [@IPHERE.46324] when you define link services.paranoianet.com ? check (again) the anope configuration.

[Phillip]

Uplink from Anope

Code: [Select]

       uplink
{
        /*
         * The IP or hostname of the IRC server you wish to connect Services to.
         * Usually, you will want to connect Services over 127.0.0.1 (aka local$
         *
         * NOTE: On some shell providers, this will not be an option.
         */
        host = "192.99.249.221"

        /*
         * Enable if Services should connect using IPv6.
         */

        ipv6 = no

        /*
         * Enable if Services should connect using SSL.
         * You must have an SSL module loaded for this to work.
         */
        ssl = yes

        /*
         * The port to connect to.
         * The IRCd *MUST* be configured to listen on this port, and to accept
         * server connections.
         *
         * Refer to your IRCd documentation for how this is to be done.
         */
        port = 6900

        /*
         * The password to send to the IRC server for authentication.
         * This must match the link block on your IRCd.
         *
         * Refer to your IRCd documentation for more information on link blocks.
         */
        password = "2yhZqcqoBxA3rfIz5F4NfG4/+1rrilRpsbWnmsFnZ7g=";
}


[CrazyCat]

And did you check your serverinfo block in the .conf ? Particularly the name (must be services.paranoianet.com)

[Phillip]

My serverinfo block

Code: [Select]

serverinfo
{
        /*
         * The hostname that Services will be seen as, it must have no conflict$
         * other server names on the rest of your IRC network. Note that it doe$
         * to be an existing hostname, just one that isn't on your network alre$
         */
        name = "services.paranoianet.com"

        /*
         * The text which should appear as the server's information in /WHOIS a$
         * queries.
         */
        description = "Services for IRC Networks"

        /*


[Phillip]

This has been solved.

[CrazyCat]

It could be interesting to say use what was the cause of the issue and how you solved it.

[Phillip]

Someone ended up helping me out with it and they sorted it all out for me. I'm not 100% sure what they did.

[Lord255]

probably the link blocks were wrong.
i hope now you use localhost or 127.0.0.1 since both the ircd and the services are on the same machine. right?
anyway. (y)