Hello friends,
I can not set the Anope to inspircd because the same error could help me?
Error:
./services --debug --nofork
[Jan 12 15:06:58.931188 2015] Debug: Anope 2.0.1, build #3, compiled 15:12:27 Jan 11 2015
[Jan 12 15:06:58.931222 2015] Debug: Using configuration file conf/services.conf
[Jan 12 15:06:58.931247 2015] Debug: Start to read conf services.conf
[Jan 12 15:06:58.931275 2015] Debug: ln 7 EOL: s='define' 'name' set to 'services'
[Jan 12 15:06:58.931294 2015] Debug: ln 8 EOL: s='define' 'value' set to 'services.chatpoint.org'
[Jan 12 15:06:58.931439 2015] Debug: Unexpected word: services.conf:44
[Jan 12 15:06:58.931451 2015] Debug: *** Support resources: Read through the services.conf self-contained
[Jan 12 15:06:58.931460 2015] Debug: *** documentation. Read the documentation files found in the 'docs'
[Jan 12 15:06:58.931468 2015] Debug: *** folder. Visit our portal located at
http://www.anope.org/. Join
[Jan 12 15:06:58.931477 2015] Debug: *** our support channel on /server irc.anope.org channel #anope.
[Jan 12 15:06:58.931543 2015] Debug: Configuration file failed to validate
My conf..
services.confdefine
{
name = "services"
value = "services.chatpoint.org"
}
/*
* [OPTIONAL] Additional Includes
*
* You can include additional configuration files here.
* You may also include executable files, which will be executed and
* the output from it will be included into your configuration.
*/
#include
{
type = "file"
name = "some.conf"
}
#include
{
type = "executable"
name = "/usr/bin/wget -q -O - http://some.misconfigured.network.com/services.conf"
}
/*
* [REQUIRED] IRCd Config
*
* This section is used to set up Anope to connect to your IRC network.
* This section can be included multiple times, and Anope will attempt to
* connect to each server until it finally connects.
*
* Each uplink IRCd should have a corresponding configuration to allow Services
* to link to it.
*
* An example configuration for InspIRCd that is compatible with the below uplink
* and serverinfo configuration would look like:
*/
<link name="services.chatpoint.org"
ipaddr="127.0.0.1"
port="7000"
sendpass="PASS01"
recvpass="PASS02">
<uline server="services.chatpoint.org" silent="yes">
<bind address="127.0.0.1" port="7000" type="servers">
links.conf (inspircd)
#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
# m_spanningtree.so module! #
# #
# #
<link
# name: The name of the remote server. This must match
# the <server:name> value of the remote server.
name="hub.chatpoint.org"
# ipaddr: The IP address of the remote server.
# Can also be a hostname, but hostname must resolve.
ipaddr="chatpoint.org"
# port: The port to connect to the server on.
# It must be bound as a server port on the other server.
port="7000"
# allowmask: Range of IP addresses to allow for this link.
# Can be a CIDR (see example).
allowmask="203.0.113.0/24"
# timeout: If defined, this option defines how long the server
# will wait to consider the connect attempt failed and try the
# failover (see above).
timeout="300"
# ssl: If defined, this states the SSL module that will be used when
# making an outbound connection to the server. Options are: "openssl"
# and "gnutls" (they are compatible with each other).
#
# You will need to load the m_ssl_openssl.so module for OpenSSL,
# m_ssl_gnutls.so for GnuTLS. The server port that you connect to
# must be capable of accepting this type of connection.
ssl="gnutls"
# fingerprint: If defined, this option will force servers to be
# authenticated using SSL Fingerprints. See http://wiki.inspircd.org/SSL
# for more information. This will require an SSL link for both inbound
# and outbound connections.
#fingerprint=""
# bind: Local IP address to bind to.
bind="1.2.3.4"
# statshidden: Defines if IP is shown to opers when
# /STATS c is invoked.
statshidden="no"
# hidden: If this is set to yes, this server and its "child"
# servers will not be shown when users do a /MAP or /LINKS.
hidden="no"
# passwords: the passwords we send and receive.
# The remote server will have these passwords reversed.
# Passwords that contain a space character or begin with
# a colon (:) are invalid and may not be used.
sendpass="outgoing!password"
recvpass="incoming!password">
# A duplicate of the first link block without comments
# if you like copying & pasting.
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
allowmask="203.0.113.0/24"
timeout="300"
ssl="gnutls"
bind="1.2.3.4"
statshidden="no"
hidden="no"
sendpass="outgoing!password"
recvpass="incoming!password">
# Link block for services. Options are the same as for the first
# link block (depending on what your services package supports).
<link name="services.chatpoint.org"
ipaddr="127.0.0.1"
port="7000"
allowmask="127.0.0.1/8"
# 127.0.0.1/8
sendpass="PASS01"
recvpass="PASS02">
# Simple autoconnect block. This enables automatic connection of a server
# Recommended setup is to have leaves connect to the hub, and have no
# automatic connections started by the hub.
<autoconnect period="300" server="hub.chatpoint.org">
# Failover autoconnect block. If you have multiple hubs, or want your network
# to automatically link even if the hub is down, you can specify multiple
# space separated servers to autoconnect; they will be tried in a round
# robin fashion until one succeeds. Period defines the time for restarting
# a single loop.
<autoconnect period="120"
server="hub.br.chatpoint.org hub.us.chatpoint.org">
#-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
# This tag defines a ulined server. A U-Lined server has special #
# permissions, and should be used with caution. Services servers are #
# usually u-lined in this manner. #
# #
# The 'silent' value, if set to yes, indicates that this server should#
# not generate quit and connect notices, which can cut down on noise #
# to opers on the network. #
# #
<uline server="services.chatpoint.org" silent="yes">
Where am I going wrong?